12 Months Warranty Firestone W01-358-7609 Single Convoluted Pneumatic Air Spring
1K130070 Detailed Datas
| Diameter of the Top Cover Plate | 4.44 inches |
| Center-to-Center Distance of Screws on the Top Cover Plate | 1.75 inches |
| Diameter of the Bottom Cover Plate | 4.44 inches |
| Center-to-Center Distance of Screws on the Bottom Cover Plate | 1.75 inches |
| Screw (Nut) Thread Count for the Top Cover Plate | 3/8-16 UNC |
| Screw (Nut) Thread Count for the Bottom Cover Plate | 3/8-16 UNC |
| Air Connection/Air Hole/Air Inlet | 1/4 NPT |
| Max Diameter of the Rubber Bellow | 5.4 inches |
| Maximum Height | 1.5 inches |
| Minimum Height | 4 inches |
1K130070 Technical Data Sheets
| Dyanmic Characteristics at 3.0 inches Design Height |
| Volume @ 100 PSIG = 26.2 in3 | Natural Frequency |
| Gage Pressure (PSIG) | Load (lbs.) | Spring Rate (lbs./in.) | CPM | HZ |
| 40 | 400 | 704 | 249 | 4.2 |
| 60 | 600 | 1,003 | 243 | 4.1 |
| 80 | 800 | 1,303 | 240 | 4.0 |
| 100 | 1,000 | 1,602 | 238 | 4.0 |
| Force Table |
| Assembly Height (in.) | Volume @ 100 PSIG (in3) | Pounds Force |
| @ 20 PSIG | @ 40 PSIG | @ 60 PSIG | @ 80 PSIG | @ 100 PSIG |
| 3.3 | 29.0 | 130 | 270 | 410 | 590 | 780 |
| 3.0 | 26.2 | 200 | 400 | 600 | 800 | 1,000 |
| 2.5 | 20.0 | 270 | 530 | 800 | 1,070 | 1,330 |
| 2.0 | 12.5 | 320 | 640 | 960 | 1,280 | 1,600 |
| 1.8 | 10.0 | 340 | 670 | 1,010 | 1,350 | 1,680 |
Part Interchanges
Firestone Part No. W01-358-7609
Firestone Part No. W013587609
Firestone Part No. W01 358 7609
Firestone Part No. W02-358-5000
Firestone Part No. W023585000
Firestone Part No. W02 358 5000
Firestone Bellows No. 16-ST
Firestone Part No. W01-358-7001
Firestone Part No. W013587001
Firestone Part No. W01 358 7001
Firestone Bellows No. 16
Firestone New Bellows No. 16B
Goodyear Part No.1B5-500
Goodyear Rubber Bellows No. 579-913-500
Goodyear Rubber Bellows No. 579913500
Goodyear Rubber Bellows No. 579 913 500
Air Lift Part No.58218
Airkraft Style 1B120
ContiTech Part No. 61388
Enidine Part No. YI 1B5 500
Enidine Part No. YI1B5500
Enidine Part No. YI-1B5-500
Enidine Part No. YI-FS50-5-000
Enidine Part No. YIFS505000
Enidine Part No. YI FS50 5 000
Numatics Part No. ASNS1111
Air Spring Should Pay Attention To In The Application
1. It is forbidden to use the air spring beyond the recommended safe extension height.
2. In order to prolong the service life of the air spring, do not use the air spring below the minimum compression height.
3. Do not use the air spring under the pressure exceeding 0.7Mpa.
4. Do not use the air spring in a twisted state.
We Also Have Other Air Suspensions Remplacements to Firestone Air Springs
Firestone W01-358-7476 115B 2X3/8BN 3/4NPTCTR
Firestone W01-358-7478 119B B.RING W/BNW
Firestone W01-358-7480 22D1.5 B.RING. 1 5/8 BNW
Firestone W01-358-7485 119B 4BN 2"NPT
Firestone W01-358-7515 115B B.RING 1.63 & 1.5 BNW
Firestone W01-358-7549 116BRAISED BN 1" HOLE
Firestone W01-358-7558 233-2 BEAD RING 1 17/8 BNW
Firestone W01-358-7566 116B 1/8NPT OFF
Firestone W01-358-7569 116B 2BN 1/4NPT 90D
Firestone W01-358-7570 116B B.RING CNTRSNK 1 3/4BT
Firestone W01-358-7572 116BH 4X3/8BN 1/4NPT CTR
Firestone W01-358-7591 115BH B.RING 1 5/8 BNW
Firestone W01-358-7592 160BY B.RING
Firestone W01-358-7594 116B1 B.RING CTRSUNK 5/16 BNW
Firestone W01-358-7595 116B1 2BN 1/4NPT
Firestone W01-358-7606 117B B.RING CNTRSNK 1 3/4 BNW
Firestone W01-358-7609 16B 2BN 1/4NPT CTR SS
The Detailed Pictures of 1K130070
Company Profile
Guangzhou Guomate Air Spring Co., Ltd. is located in Guangzhou, China's first open port, just a fifteen-minute drive from Guangzhou Baiyun International Airport. The company boasts a modern building with an area of approximately 20,000 square meters and state-of-the-art production facilities for rubber air springs. It is currently the largest air spring production base in China. The company's products are primarily used in commercial vehicles, rail vehicles, and industrial machinery and equipment. The main products are: rubber air springs, bus airbags, truck airbags, air springs for the paper machine industry, airbags for large washing machines, and rubber air springs for automobiles. We currently offer hundreds of models and designs and can also design and produce according to customer requirements or existing product specifications. New and existing customers are welcome to contact us for a consultation. Our company utilizes state-of-the-art domestic air spring processing facilities and integrates foreign air spring production technologies. Thanks to our unique production process, we produce according to international standards and thus create world-class products.
Factory Workshop
Product Tags:
|
|
12 Months Warranty Firestone W01-358-7609 Single Convoluted Pneumatic Air Spring Images
|
